This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield. Height: 80cm Width: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
Our leather straps are cut from robust cowhide and are available in
many lengths, widths and colours. Build your own belt and decorate it
with our many buckles and fittings!Material: upper leather
Lenghts: 135cm & 170cmWidths: 2cm-5cm
With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.
Dimensions: 1.6 mm x 13 mm.
Fix fittings and decorations with brass nails, how does that work?
The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.
Have fun crafting!
The "Alex" shirt distinguishes itself by the decorative lacing alongside the sleeves and its stitched eyelets. A standing collar as well as a lacing on the chest make it the ideal medieval costume.Material: cotton
The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings.
Suitable for belts from 1 cm to 1,5 cm wide
Material: brasstongue dimensions: 1,3 cm x 6, 3 cmDimensions of the buckle: 2 cm x 7 cm
Our "Basic" cloak has a simple cut based on historical finds and should not be missing from any wardrobe. It is ideal for adding a weatherproof finishing touch to simple garments and with its hood it protects against the sun, light rain and prying eyes. It is fastened at the chest with firmly sewn fabric straps.The "Basic" line was specifically developed to provide beginners with cost-effective basic equipment. It also offers thanks to its simple cut & Look an excellent basis for modding, customizing or targeted wear/dirt for a more realistic representation. Material: 100% cottonUnisizeNecklinecircumference60Height Hood45Length Sideseam140All figures are in cm. Our products are handmade, dimensions and colours may therefore differ slightly.
This simple undergarment is closed with a lacing in the back of the neck and can be combined with lots of other dresses and skirts. It has the same cut as the undergarment "Marita" but is made of our normal cotton fabric and therefore best suitable for cooler weather conditions.
Material: CanvasGrößen: S-XL
The second edition of our popular foam weapons is made out of a new material. It is more tear-resistant than our old foam and absorbs the energy of every hit. Moreover, we updated the handle wraps so that you can wield your weapon with a good grip and accuracy even in a heated battle.The "Heinrich" short sword for the Battle-Standard series is a classical knight's sword. A fine fuller decorates the tapered blade. The classical disc pommel and the typical guard, slightly bend upwards, underline "Heinrich"'s historical character. It is a straight, slender sword, the contours of which give it a very elegant and military appearance. Available in the colours gold and steel, it is a pretty and efficient weapon which is not only suitable for noble born characters and knights."Heinrich" is also available as longsword or dagger.Material: PU foam, GRPTotal length: 84 cmBlade length: 62 cmGuard width: 21 cmPlease note: Battle Standard products may have a hole on the flat of the blade near the point. This hole is created during production, a technical necessity in order to stabilize the core rod while the weapon is filled with foam. Moreover, further small holes may be present on the surface in other places. These holes are not to be understood as flaws and do not affect the foam weapon’s safety.Disclaimer: All items shown here were especially designed to safely portray fights in controlled environments like live roleplay events, theatre stages etc. The foam weapons are made with a glass fibre reinforced plastic rod as a core, fully encapsulated in soft foam to avoid injuries.
"Armin" is a medieval headpiece for men. It's available in three sizes
to cover nearly all heads. We recommend individually decorating the
"Armin" cap by embroidering it or adding a feather or a broach.A
couple of words on the history of this cap: it is an enhancement of
what's called a "pillbox", and is referred to as the Italian beret. It
was mostly worn by townspeople and well-off citizens of southern Europe
in the late medieval period until the renaissance. While younger people
used to wear the cap to the side, cardinals and other authorities would
wear them upright (see the Doge of Venice).Material: CanvasHeight: 23cmSizes: S (58cm), M (60cm), L (62cm)
€17.90*
Over 25 years of experience
Choose from 5,000+ items
Free shipping from 100€ (DE)
Express-Shipping within 24h (DE)
This website uses cookies to ensure the best experience possible. More information...