Edward spaulders 2nd edition blank

103,92 €*

% 129,90 €* (économie de 20%) précédemment 129,90 €*

Prix TTC, frais de livraison en sus

Délai de livraison 2-5 jours

Réf. produit : 963015

Nos avantages

Livraison gratuite à partir de 150€ (FR,BE+)
Plus de 25 ans d'expérience
Choisissez parmi plus de 5.000 articles

Informations sur le produit "Edward spaulders 2nd edition blank"

This pair of massive spaulders is built with additional blade turners attached on top of the shoulder parts. This makes every wearer appear even bigger. The spaulders are built from two parts (shoulder and upper arm) and are being attached on the collar or torso of an exsisting armour and fixed to the wearers upper arm to hold them in place. This way they stay in place and will disturb the wearers movement only a little. The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably.

Material: 1,2mm steel
Length: 35 cm

Width: 52 cm

Les clients ont également vu

Edward full legguard 2nd edition browned/blank

The 'Edward' leg guard is designed large enough to be worn by warriors with sturdy legs. It can be supplemented with an additional layer of padding for larger fighters to complete the plate armour. It is secured with a strap to the belt. Material: 1.2mm steel Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

103,92 €* 129,90 €* (économie de 20%)
précédemment 129,90 €*

Edward full legguard 2nd edition blank

The 'Edward' leg guard is designed large enough to be worn by warriors with sturdy legs. It can be supplemented with an additional layer of padding for larger fighters to complete the plate armour. It is secured with a strap to the belt. Material: steel Middle of knee to outer edge of thigh52.5Middle of knee to inner edge of thigh34Metal width at thigh33Middle of knee to lower edge middle22Metal width at bottom22Total lengthca. 73 All measurements are in centimetres. Our products are handcrafted, so dimensions and colour tones may vary slightly. Photographic images and screen settings may not accurately represent colour tones.

99,92 €* 124,90 €* (économie de 20%)
précédemment 124,90 €*

Edward spaulders 2nd edition browned/blank

111,92 €* 139,90 €* (économie de 20%)
précédemment 139,90 €*

Edward torso armour 2nd edition blank

The "Edward" torso armour is inspired by the typical armours of the High Middle Ages. The segmented breastplate is highly movable, dominated by dynamically curved lines. Decorative grooves and rivets give the armour a noble yet menacing character. The thigh guards of the Edward series can be attached to straps on the lowermost segment of the breastplate. This armour is suitable for portraying paladins and knights, as well as mercenaries or adventurers. It can be combined with any shoulder armour from our range. The recommended waist circumference is 126 cm (including gambeson) – however, the armour can be widened up to a maximum of 144 cm with leather straps attached on the sides. Material: 1.2 mm steel Chest circumference: 115-125 cm Total length: 66 cm Shoulder width: 33.5 cm Hip circumference: 125-146 cm

263,92 €* 329,90 €* (économie de 20%)
précédemment 329,90 €*

Edward full armguard 2nd edition browned/blank

The 'Edward' arm guard is large enough to be worn over a gambeson and chainmail. The upper segment is fastened to the inside of the shoulder plate. Material: 1.2mm steel Length: 54 cm Upper width: 48 cm Lower width: 33 cm"

103,92 €* 129,90 €* (économie de 20%)
précédemment 129,90 €*

Les clients ont aussi acheté

Gustav - Gorgerin

Ce gorgerin correspond à l'ensemble d'armure Gustav.Matière : acier de 1,2 mmlongueur frontale : 23cmlongueur totale : 29cm

23,92 €* 29,90 €* (économie de 20%)
précédemment 29,90 €*

Georg cuirass blank with bearing damage

The Cuirass "Georg " is a very special armour. Made of 1.2 mm thick steel, it is decorated with curved beading and rivets. Two flexible moveable protect the abdomen. flexibly connected side elements protect the flanks. Together with the "Georg" gorget, which can be hooked into the buckle on the chest, the cuirass is a very flexible and efficient armour for the upper body. The wide shoulders and the elegant leg pockets of the series complement the Cuirass "Georg " optimally and result in an armour that guarantees excellent protection with maximum mobility. Material: 1.2 mm steel Length: 41 cm Width: 41 cm Circumference: approx. 130 cm Weight 3, 5 kg This armour may have rust spots, scratches, or dents. Therefore, we are offering it to you at an unbeatable special price. Only while supplies last!

83,91 €* 119,90 €* (économie de 30.02%)

Elias - Protèges-jambe

Cette paire de protèges-jambes correspond à l'ensemble d'armure Elias.Matière : 100% acier 1,2mm

49,94 €* 99,90 €* (économie de 50.01%)

Seulement 4 disponible

Aulber - Veste gambisonnée bordeaux - Edition Limitée

Une veste gambisonnée idéale à porter sous une armure de plaques.Matières : coton et feutre de laine

39,90 €* 119,90 €* (économie de 66.72%)