This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield. Height: 80cm Width: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
Our leather straps are cut from robust cowhide and are available in
many lengths, widths and colours. Build your own belt and decorate it
with our many buckles and fittings!Material: upper leather
Lenghts: 135cm & 170cmWidths: 2cm-5cm
With "Tinne" you get 8 brass nails - 1.6 mm round head pins made of solid brass MS-64 with a share of 64% copper and 36% zinc. Pins made of this alloy are very easy to shape when riveting and are thus ideal for attaching historic and fantastic fittings in medieval reenactment and LARP.Dimensions: 1.6 mm x 13 mm.Fix fittings and decorations with brass nails, how does that work?The fitting or decoration to be fastened is placed on the belt or pocket. Mark the required 2 mm holes in the desired places and punch the leather with an eel. Of course, using a pair of punch pliers is also possible, but the hole must not be too large then, because the leather is punched out and, as with the use of eels, can not contract again around the rivet. The head of the pin should of course be on the side that is visible later, the so-called "show side". Depending on the thickness of the material, shorten the brass pin on the pointed side to 1.5 mm - 2 mm and tap it in circular strokes with the smallest possible round hammer, so that a slightly arched head is formed and the fitting is solidly connected to the backing material. For smoothing a sandpaper with 600er Körning is recommended. For a better grip, you can also use a small washer, but the riveting is then not so medieval.Have fun crafting!
La camicia Alex si distingue per gli incroci di lacci lungo le maniche, è disponibile con gli occhielli in metallo o le asole cucite. Il tipico colletto e le stringhe lo rendono il capo medievale per eccellenza.Materiale: cotoneTaglie: dalla S alla XXL
The two-piece belt set "Schleswig" consists of a belt tongue and a long buckle. Made of brass and cast by hand, it is inspired by belt decorations of the Vikings.
Suitable for belts from 1 cm to 1,5 cm wide
Material: brasstongue dimensions: 1,3 cm x 6, 3 cmDimensions of the buckle: 2 cm x 7 cm
The airy undergarment "Wanda" is simply cut and can be combined in various ways. With the frilled drawstring, you can adjust the desired fit and size perfectly. Made from lightweight cotton, it also works ideally as an outer garment for warm days.Material: 100% cotton
S
M
L
XL
XXL
Chest circumference
98
106
115
127
140
Sleeve length
60
60,5
61
61,5
62
Hem circumference
260
270
280
290
300
HPS length
136,5
138
140
142
143,5
All figures are in cm. Our products are
handmade, dimensions and colours tones may therefore differ slightly.
Questi schinieri imbottiti offrono comodità! Indossali sottogli schinieri di piastra, la tua armatura sarà più "leggera" e più confortevole.I bracciali vengono chiusi con lacci di cuoio sull'avambraccio.Venduti in coppia. Materiale: canvas, poliestereLunghezza: 42 cmA causa della colorazione naturale del cuoio, è possibile che
questo articolo sia fornito in differenti sfumature.
Napoleonic Austrian ‘German’ Cavalry (Cuirassiers, Dragoons, Chevauxlegers) 1798-1815These
figures can be built as Cuirassiers, Dragoons or Chevauxlegers (Light
Dragoons prior to 1801) from 1798-1815 with the appropriate head/helmet
variants. They are all in campaign dress i.e. all wearing overalls. The
box contains 14 cavalrymen including Officer, Trumpeter and optional
standard bearer.This set allows you to build the large ‘German’ cavalry arm of the Austrian Army throughout the Napoleonic Wars.Figures designed by Alan Perry
La sopravveste Juliana ha il taglio classico, indossata dalle nobili signore del XIV secolo. In tedesco viene chiamata "Höllenfensterkleid" che vuol dire abito con le “finestre sull’inferno” in quanto veniva indossata su abiti aderenti che non piacevano alla chiesa, la smanicata molto larga era paragonata a una finestra sull’inferno.Usualmente si indossa su una veste.
Materiale: canvasTaglie: S-XXL
19,94 €*
39,90 €*(50.03% risparmio)
Oltre 25 anni di esperienza
Scelta tra oltre 5.000 articoli
Spedizione gratuita da 100€ (DE)
Consegna espressa in 24 ore (DE)
Questo sito web utilizza i cookie per assicurare la miglior esperienza possibile. Ulteriori informazioni...