Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.
THE universal spray made by the Ballistol company. Can be used for metal, just as well as leather and various other materials. A well known care product for animals paws and fur; a true allrounder, completly untoxic. We advise it for metal armour care and protection of leather armours.The practical 50ml spray can for your journeys, or the large 200ml spray can for your home.Please read the containers warnings section.Can not be exported outside the EU due to EU-law.
Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelColour: blank, browned
These are our big "Balthasar" spaulders. Just the right thing for knights and other nobles. Although they are rather big and decorated, these spaulders are "ready for the field". The spaulders are composed from seven parts and therefore very flexible in movement.Material: 1.2mm steelColours: blank, browned
The small shoulders "Balthasar " provide high stability with maximum mobility. Each of the four flexibly connected segments was fitted with a bead and the typical Balthasar riveting strip. This does not only look very noble, it also significantly increases the stability of the segments. Together with sturdy rivets made of solid steel, these shoulders hold many battles without deforming. They are well suited to complement a ' noble ' armor and for all armor carriers that want to show some prosperity.
Like all Mytholon plate shoulders, this one is of course compatible with all our plates gorgets.
Material: SteelLength: 31 cmWeight: 1.5 kgsColours: blank, burnished
The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar.
Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm
Weight: 1 kg
Colour: blank, browned
The "Balthasar" gorget is a very stylish piece of armour. Elegant lines and decorative rivets along its edges, make it stand out of the mass.This gorget can also be combined with all other Mytholon spaulders. To make them look their best we recommend combining them with other "Balthasar" armour parts.There are two different "Balthasar" gorgets.
We recommend the smaller size for the leaner necks of ladies and adolescents.
We recommend the larger size for gentlemen.Small: Length front part: 23cmTotal width: 29cmLarge:Length front part: 29cmTotal width: 36cm
Material: 1,2mm SteelColours: blank, brownedYou can find all our "Balthasar" series products here.Maybe take a look at our Padded Jackets to wear them underneath your Armour. This maximizes the comfort wearing it.
Our small "Adam" spaulders are perfectly suited to be worn as additional armour over chainmail or leather armour. Due to their size and the flexible lamellae covering the upper arms, these pieces will not encumber you in any way.Material: 1.2mm steelColour: blank, browned
The large spaulders of the "Markward" series have a long upper arm segment, which is attached to the generously designed shouldersegmenet. The deceived drawers not only serve the ornament, it also gives additional stability. The excellent price make the big shoulders "Markward" special. Their imposing, carefully shaped shoulder segments are ideal for the addition of heavy armor.
Of course, these shoulders are compatible with all Mytholon gorgets.
Material: 1, 2mm steelLength: 30 cmWeight: 2 kgColour: blank, browned
The "Adam" gorget captivates with simple elegance. Two embossed ornamental beads are not only jewelry, they also give the collar a lot of stability. All edges are of course, as with all Mytholon armor, crimped. Thanks to its simple shape, this gorget can be used for all imaginable armament concepts. All the spaulder from our plate armour range can be attached to this collar.
Material: 1, 2mm steelShoulder blade width: 8cmTotal width: 33cmNeck length: 14cmFront length: 22cmTotal length: 46cm
Weight: 1 kg
Colour: blank, browned
This short-sleeved chain mail was built for average sized adults with a "normal" chest circumference. It is wide enough to be worn on top of a padded gambeson.The sleeves cover some 2/3 of the arms - still being considered a short sleeve chain mail - and reaches down to the middle of your thigh.We suggest to wear this chain mail with an average chest circumference from 90cm to 125cm. This way it chan be worn in combination with a padded gambeson and can extend itself to a maximum width of 140cm circumference. A belt can help to distribute the weight properly.
The blank version is fully galvanized and does not rust. Oiled and browned chainmails are ungalvanized and are supplied with a high lubrication. Please remove the excess oil before first use.
Ungalvanized chain shirts should be treated regularly with oil like Ballistol.
Classic 4-in-1 pattern
Material: spring steelRings diameter: 9mmWeight: 12 kgColour: blank, oil finish, browned
For further information please click here!
Lacing shirt, pirate shirt, medieval shirt...First risen to
popularity in the Middle Ages, this shirt is known by many names today.
Lacing shirts like this are associated with the Renaissance, brave
musketeers, pirates and swashbucklers, but also flower power kids from
the 1960s. Ever since this shirt has become a staple of the fantasy and
medieval world, we call it costume shirt.Made from sturdy cotton
by Mytholon, this shirt is available in a wide variety of colours. It
serves as a basis for historical outfits – or costume, as it were, like
few other garments do.The lacing allows the shirt to be worn
open on warm days and tied close when it's cold outside. The sleeves are
very generously cut and allow great freedom of movement when fighting
and dancing. The wide cuffs are each closed by means of a lacing.This is a shirt for many occasions, not only as a costume, but also as a comfortable leisure shirt.Material: cotton canvasSizes: S to XXL
A laurel wreath is a sign of glory, victory and honour. It is often used to supplement an existing coat of arms, perhaps after a victorious battle or a fulfilled quest. This filigree patch consists of two parts, so the width and circumference of the wreath can be adjusted to your liking. For technical reasons, not all leaves are cut out. However, this can easily be remedied with a scalpel before sewing. This patch is ideally suited to be affixed to shields, tabards or banners. The back is equipped with an iron-on adhesive, so
the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large version:
Height: 5cmDiameter (semicircle): 30cmLength: 42cmWeight: 13g
Measurements of the medium version:
Height: 4cmDiameter (semicircle): 16cmLength: 26cmWeight: 3gSizes: Large & mediumColours: green, yellow, cream
The padded vest "Arthur" is backstitched in diamond-shape and closed by four buckle-straps in the front. The sleeves and the seam on the bottom is riveted with brass eyelets, which allows the tassets and the sleeves to be combined with the jacket.The diamond-shaped backstitching povides an extra in movability and, at the same time, keeps up the padding, which avoids bruises and scratches. The collar is backstitched in smaller diamonds: this brings more comfort to the neckarea.There is enough leather strings included to attach all the additional "Arthur" parts.Material: canvas, polyester
These are the matching tassets for our "Berengar" armour jacket. They are attached to the lower part of the armour jacket and protect your entire thighs."Berengar" is an absolutly stylish leather armour with metal parts. You can simply don the jacket and adjust it to your body by means of buckles.Dimensions: 29x40 cm/35x40 cmOur outfit suggestion:"Kasimir" trousersGambeson "Leopold"Short-sleeved chain mail shirtRing armour "Berengar"Leather
is a product of nature and may take dyes differently. The actual hue
may differ from the image.
Discontinued, only while stocks lastThe "Elisa" blouse has short sleeves and is closed in the front with a ribbon. It´s best combined with a bodice or our ladies belt.
Material: 100% cotton
€14.95*
€29.90*(50% saved)
Over 25 years of experience
Choose from 5,000+ items
Free shipping from 100€ (DE)
Express-Shipping within 24h (DE)
This website uses cookies to ensure the best experience possible. More information...