The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more. Measurements: 20cm x 17cm Material: cotton canvas
Our heraldic patch "Castlew" is classic but rich in detail. Two stylized towers are connected by a wall with open gate. In heraldry, a castle, similar to a tower, often stands for protection and vigilance, but usually symbolizes the castle of the one bearing the coat of arms. This patch is ideally suited to be affixed to shields or banners. The back is equipped with an iron-on adhesive, so the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large patchHeight: 26.5cmWidth: 34.5cmWeight: 45g
Measurements of the medium patchHeight: 16cmWidth: 20cmWeight: 17g
Sizes: large & mediumColours: yellow, natural, grey, black
A bear stands in heraldry for strength and cunning. But also for health and protection. This patch is ideally suited to be affixed to shields, coats of arms or banners. The back is equipped with an ironing adhesive, so the patch can be easily fixed before sewing. The carrier material is a stable woven Canvas
Material: Cottoncanvas, polyester
Dimensions of the large variant:Height: 35 cmWidth: 20 cmWeight: 25 g
Dimensions of the medium variantHeight: 20 cmWidth: 10,5 cmWeight: 8 g
Sizes: large & mediumColours: Brown, cream, black
A laurel wreath is a sign of glory, victory and honour. It is often used to supplement an existing coat of arms, perhaps after a victorious battle or a fulfilled quest. This filigree patch consists of two parts, so the width and circumference of the wreath can be adjusted to your liking. For technical reasons, not all leaves are cut out. However, this can easily be remedied with a scalpel before sewing. This patch is ideally suited to be affixed to shields, tabards or banners. The back is equipped with an iron-on adhesive, so
the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large version:
Height: 5cmDiameter (semicircle): 30cmLength: 42cmWeight: 13g
Measurements of the medium version:
Height: 4cmDiameter (semicircle): 16cmLength: 26cmWeight: 3gSizes: Large & mediumColours: green, yellow, cream
The cross of the Knights Templar as a convenient, high-quality, fringed patch that allows you to
avoid creating the design yourself. The back contains an iron-on
adhesive. The fabric is easy to individualized according to your ideas
by means of fabric paints. .
Measurements: Small: 5 x 5cmMedium: 20 x 20cmLarge: 35 x 35cmMaterial: cotton canvas
The chaos star in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth. The fabric can easily be painted - a great possibility to individualize your patch even more.
Diameter:Medium: ~19cm Material: cotton canvas
The lion stands for strength and valor. This patch is ideally suited to be affixed to shields, coats of arms or banners. The back is equipped with an ironing adhesive, so the patch can be easily fixed before sewing. The carrier material is a stable woven.
Material: Cottoncanvas, polyester
Measurements of the large patchHeight: 34 cmWidth: 24 cmWeight: 30 g
Measurements of the medium patch
Height: 19,5 cmWidth: 14 cmWeight: 5 g
Sizes Big & MediumColours: yellow, natural, red, black
In heraldry, the stag stands for peace and harmony, but also for politics and diplomacy. He is depicted mid-leap on this detailled embroidered patch. This patch is ideally suited to be affixed to shields, tabards, or banners. The back is equipped with an iron-on adhesive, so the patch can be easily attached before sewing. The carrier material is a stable cotton canvas.
Material: Cotton canvas, polyester
Measurements of the large variant:Height: 29cmWidth: 23cmWeight: 20g
Dimensions of the medium variant:Height: 19cmWidth: 16cmWeight: 9g
Sizes: large & mediumColours: yellow, cream, red, black
The eagle symbolizes immortality, courage, foresight and power in the heraldry.
This patch is ideally suited to be affixed to shields, coats of arms or banners. The back is equipped with an ironing adhesive, so the patch can be easily fixed before sewing. The carrier material is a stable cotton canvas. For technical reasons, not all parts of the eagle are cut out. This can easily be done with a scalpel before sewing.
Material: Cotton canvas, polyester
Dimensions of the large variant:Height: 35 cmWidth: 33.5 cmWeight: 50 g
Dimensions of the medium variant
Height: 19 cmWidth: 19 cmWeight: 20 g
Sizes: large & MediumColours: yellow, cream, black
The cross of the Knights of Malta as a convenient, high-quality, fringed patch that allows you to avoid creating the design yourself. The back contains an iron-on adhesive. The fabric is easy to individualized according to your ideas by means of fabric paints.
Measurements: Small: 5 x 5cmMedium: 20 x 20cmLarge: 35 x 35cmMaterial: cotton canvas
This triangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.Height: 80cmWidth: 52cm
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35 cmWidth: 12.5 cm
The "Korbin" belt badges in different shapes are ideal for presenting
your coat of arms. They can be additionally decorated with our patches
or fabric paints.
Material: cottonLength: 35cmWidth: 12.5cm
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35 cmWidth: 12.5 cm
This war standard is made from canvas. The colors are applied squared and match historical designs. We recommend to embroider the standard with your crest or to decorate it with our range of Patches.Material: heavy cottonLength: 160cm, width: 75cm, max. diameter for the loop: 8cmDelivered without mounting
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35cmWidth: 12.5cm
The "Korbin" belt badges in different shapes are ideal for presenting
your coat of arms. They can be additionally decorated with our patches
or fabric paints.
Material: cottonLength: 35cmWidth: 12.5cm
The "Korbin" belt badges in different shapes are ideal for presenting your coat of arms colors with them. They can be additionally decorated with our patches or fabric paints.
Material: cottonLength: 35 cmWidth: 12.5 cm
This rectangular shield cover is part of our clever shield system. It is made of robust cotton fabric. On the back it has got a drawstring that is used to fix it round the shield. Additionally is has got several strap loops for the tie straps on the shield.
We recommend our patches to customize your shield.
Height: 100cmWidth: 65cm
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
The Fleur-de-Lis in heavy cotton canvas. Use this patch to tune up your shield cover or your costume. The back is made with a fusible, so you can iron it onto your cloth.The fabric can easily be painted - a great possibility to individualize your patch even more.Measurements: 20cm x 17cmMaterial: cotton canvas
Our tabard "Ignaz" is available in many different colour combinations. A great piece of clothing for soldiers and guardsmen. A tabard makes it easy to mark yourselves as a closed group even if you are wearing different types of armour and clothing.Material: 100% CottonUnisizeLength: 126 cmWidth: 73 cm
The airy undergarment "Wanda" is simply cut and can be combined in various ways. With the frilled drawstring, you can adjust the desired fit and size perfectly. Made from lightweight cotton, it also works ideally as an outer garment for warm days.Material: 100% cotton
S
M
L
XL
XXL
Chest circumference
98
106
115
127
140
Sleeve length
60
60,5
61
61,5
62
Hem circumference
260
270
280
290
300
HPS length
136,5
138
140
142
143,5
All figures are in cm. Our products are
handmade, dimensions and colours tones may therefore differ slightly.
The "Sigbert" tunic has a classic cut and is decorated with fine braids on the hemlines on the neckline and sleeves. The elaborate herringbone pattern makes it an ideal garment for noble characters.Material: fishbone (30% polyester, 30% acrylic, 21% wool, 13% cotton, 6% viscose)
The tabard "Justus" is made of soft suede. It is tied on the sides with leather laces. So it can be adjusted individually to the size of its wearer. For more mobility, the jerkin is dagged at the front and back. "Justus" is a wind-proof and robust coating with many combination possibilities. It is expandable with hoods and collars, wears well under a leather armour or over a chain mail. With this jerkin as a base, many costume ideas can be realized.
Material: 100% suedeLeather is a product of nature and may take dyes differently.
The actual hue may differ from the image.
Discontinued, only while stocks lastThe "Tilly" vest premium cotton is made in the style of the 17th century with a long cut and may be closed by means of ornamental buttons in the front.Material: Premium cottonSizes: S-XXL
€39.95*
€79.90*(50% saved)
Over 25 years of experience
Choose from 5,000+ items
Free shipping from 100€ (DE)
Express-Shipping within 24h (DE)
This website uses cookies to ensure the best experience possible. More information...